Sidebar Menu

Hot Products

Long Life Stainless Steel Shank Mounted Wheel Brush For Polishing And Deburring On Drill Bit

All the inner and outer parts of these long life Stainless steel shank mounted wheel brush for polishing and deburring on drill bit with shank such as shanks, side plates, rings, etc.

Exception
In the case of long life, Stainless steel shank-mounted wheel brush for polishing and deburring on the drill bit with plastic filament material, it is not only the tips of the filament that can be used but 2–3 mm of the bristle length. In the case of stationary brushes, machining should be carried out under the middle of the brush
Visible trim lengths
Short visible trim lengths give a stiffer trim surface, resulting in more aggressive brushing action. Longer trim lengths are more flexible, giving a softer brush performance that produces a more uniform finish, even on non-homogeneous surfaces.We offer the wheel brush for drill to buyers around the world. We are determined to be the best manufacturer and supplier of stainless steel wheel brush in China. We will provide the most suitable product solution according to your requirements.
How to improve the self-sharpening effect of the long life Stainless steel shank-mounted wheel brush for polishing and deburring on drill bit?

By changing the brush operating direction can improve the self-sharpening effect.

What is the Filament diameters affect the efficiency of the long life Stainless steel shank-mounted wheel brush for polishing and deburring on drill bit?

Thick filament
● An aggressive brushing action with a coarse surface finish, as fewer filament tips are in contact with the surface of the work-piece at the same time
Thin filament
● A soft brushing action with a fine surface finish, as many filament tips are in contact with the surface of the work-piece at the same time
● The longer service life of the brush due to the higher level of flexibility of the filaments

Solutions to problems
Inadequate brushing action
■ Increase rotational speed or use a larger brush diameter at an unchanged rotational speed
■ Choose a brush with shorter trim
■ Use a brush with thicker filaments
Excessively strong brushing action
■ Reduce rotational speed or use smaller brush diameter at an unchanged rotational speed
■ Reduce the brushing pressure
■ Choose a brush with longer trim
■ Use a brush with thinner filaments
The surface is too rough and irregular
■ Use a wider brush
■ Use a brush with thinner filaments
■ Reduce rotational speed
Excessively fine finish/ surface appears too polished
■ Select a brush with thicker
filaments
■ Select a brush with shorter trim
■ Reduce rotational speed
Secondary burr formation
■ Change brush-to-workpiece
operating angle

■ Choose a brush with shorter trim

■ Use a brush with thicker filaments

■ Choose a brush with shorter trim

■ Use a brush with thicker filaments

Dia Brush Thick Wire Length Bore Dia
D A T d RPM Abrasive Nylon Copper Coated Brass Wire Stainless Steel Steel Wire
(mm) (mm) (mm) (mm) 4500  Model No.  Model No.  Model No.  Model No.  Model No.
25 5 – 9 6 4500 L0225-SIC L0225-AIO L0225-COS L0225-CW L0225-SS L0225-AS
30 5 – 30 6 4500 L0230-SIC L0230-AIO L0230-COS L0230-CW L0230-SS L0230-AS
35 5 – 30 6 4500 L0235-SIC L0235-AIO L0235-COS L0235-CW L0235-SS L0235-AS
40 5 – 40 6,8 4500 L0240-SIC L0240-AIO L0240-COS L0240-CW L0240-SS L0240-AS
45 7 – 50 6,8 4500 L0245-SIC L0245-AIO L0245-COS L0245-CW L0245-SS L0245-AS
50 10 – 50 6,8 4500 L0250-SIC L0250-AIO L0250-COS L0250-CW L0250-SS L0250-AS
55 10 – 50 6,8 4500 L0255-SIC L0255-AIO L0255-COS L0255-CW L0255-SS L0255-AS
60 10 – 60 6,8 4500 L0260-SIC L0260-AIO L0260-COS L0260-CW L0260-SS L0260-AS
65 10 – 60 6,8 4500 L0265-SIC L0265-AIO L0265-COS L0265-CW L0265-SS L0265-AS
70 10 – 60 4500 L0270-SIC L0270-AIO L0270-COS L0270-CW L0270-SS L0270-AS
75 10 – 70 4500 L0275-SIC L0275-AIO L0275-COS L0275-CW L0275-SS L0275-AS
80 10 – 80 4500 L0280-SIC L0280-AIO L0280-COS L0280-CW L0280-SS L0280-AS
85 10 – 80 4500 L0285-SIC L0285-AIO L0285-COS L0285-CW L0285-SS L0285-AS
90 12 – 80 4500 L0290-SIC L0290-AIO L0290-COS L0290-CW L0290-SS L0290-AS
95 12 – 80 4500 L0295-SIC L0295-AIO L0295-COS L0295-CW L0295-SS L0295-AS
100 12 – 80 4500 L02100-SIC L02100-AIO L02100-COS L02100-CW L02100-SS L02100-AS

Long Life Stainless Steel Shank Mounted Wheel Brush For Polishing And Deburring On Drill Bit Long Life Stainless Steel Shank Mounted Wheel Brush For Polishing And Deburring On Drill Bit

Scroll to Top