Call us at +8613781822862

Inverted and external coil brush can be winding as the right-hand and left-hand wound, in a wide variety of synthetic (including conductive), metal, and natural filaments and in a full range of pitches. Metal channel strip brush is available as an alternative to metal back brush. It's great for use around curves and in-field installation. Mandrels for external coil brush can be made to your specifications, including solid or tubular construction, keyway or threaded mounting, welded or clip-mounted brush. The coil cleaning brush consists of a coil strip with a defined inner diameter, which can be supplied and assembled on a body properly fixed, or as a spare part to be assembled by the customer. The coils of the coil brush may be wound up closed to or distanced., The fill density of the brushing surface or thickness may be compared to the winding pitch or to the number of coils wound onto a body.

Stainless Steel Crimp Wire Chimney Cleaning Brushes

Stainless Steel Crimp Wire Chimney Cleaning Brushes

The Bursten Stainless Steel Crimp Wire Chimney Cleaning Brushes is used along with the Viper systems to remove soft to medium soot in all chimneys. The center hole is 1.1" (28mm) in diameter and can be used for all Bursten systems except for the Mini and Compact.

Nylon inverted coil strip brush

Nylon inverted coil strip brush

Customization specification accepted this type of brush can be made with nylon materials, steel wire, pure brass wire, brass coated steel wire.

Inwards spiral motorcycle chain cleaning brush

Inwards spiral motorcycle chain cleaning brush

this type of brush can be made with nylon materials, steel wire, pure brass wire, brass coated steel wire.

Industrial round nylon brush polish roller brushes nylon spiral brush

Industrial round nylon brush polish roller brushes nylon spiral brush

Industrial round nylon brush polish roller brushes nylon spiral brush might be seen on vacuum cleaners, street sweepers or an industrial compound applicator.

Chain cleaning nylon spiral inside coil brush

Chain cleaning nylon spiral inside coil brush

this type of brush can be made with nylon materials, steel wire, pure brass wire, brass coated steel wire.

24 long inward spiral wound coil brushes

24 long inward spiral wound coil brushes

This 24 Long Inward Spiral Wound Coil Brushes can also can be made of white nylon, black nylon, stainless steel wire, copper wire, carbon steel wire, abrasive nylon, Tampico fiber, etc.

Outside Spiral Brush

Single-band Outside Spiral Brush To Assemble In Rotary Cylinder Brushes For Conveyor And Panel Cleaning

The single band outside spiral brush to assemble in rotary cylinder brushes for conveyor and panel cleaning with roller core are for the most diversified systems. The outside spiral brush offers a much wider variety concerning the fill material, fill configuration and fill density. Depending on the fill material and the dimensions we can also increase the density by up to 75% to "extremely dense"

Coil Brush

Open Wound Coil Brush Ideal For Construction Of Augers For Water Treatment And Food Processing Industry

The overall length of the Open Wound Coil Brush ideal for the construction of augers for water treatment and food processing industry can be up to 6 meters, with a trimmed diameter of 700mm. These size limits ensure that no problems are encountered with handling and delivering. Because of the manufacturing limitations, the minimum length available is approximately 25mm diameter shaft with a length of 100mm, subject to the chosen strip size.

Inward Coil Brush

Inward Coil Brush Ideal For Remove Dust And Dirt On The Wire Rod After Hard Drawing Processing

Inward coil brush ideal for remove dust and dirt on the wire rod after hard drawing processing start as straight strip brushes and are formed into a cylinder shape with the metal on the outside and the filaments pointing towards the center. The brush is then stretched open to the required pitch, sometimes referred to as lead.

Electric-welded Coil Brush

Electric-welded Coil Brush Ideal For Heavy Duty Mill Roll Brushes And Coil Finishing

Electric-welded coil brush ideal for heavy-duty mill roll brushes and coil finishing is double band outside spiral brush wound up closed, welded at their inside in order to realize a single cylindrical module. Thus it is possible to assembly more modules in order to obtain the length requested; moreover, modules become easily interchangeable. Available with different diameters, filaments, and trim length.

Leave Your Messages