Sidebar Menu

Hot Products

Brush Strip No.3, 90° Right Angle Carrier

90° brushstrip draught excluders are the easy fit solution for all pedestrian, roller or sectional over-head doors where gaps allow for ingress by draughts, dust, debris and insects. As well as keeping out the unwanted, they can also help to keep in precious heat and  / or cold as they create an effective door seal to the floor. Alternatively, if you have a strip curtain that hasn’t been able to make a snug fit to the side edges of a wall or door frame, brushstrip can also be used to effectively bridge these gaps up the sides or along the top.

 

Description

Available in three aluminium sections (180°, 45° and 90°), each in six different sizes. Standard lengths are 2000mm, 2500mm and 3000mm. The aluminium fixing carrier is supplied silver mill finish and the filament is type 6 black nylon. It is hard wearing with a working temperature from -40°C to +100°C. The brush can also be supplied without the aluminium fixing carrier if required (see cam strips on opposite page). The brush length sizes quoted are the mm of brush strip protruding out of the aluminium carrier.All sections can be cut to length using a fine tooth saw. It is important that the galvanised steel channel which houses the nylon brush is then sealed to avoid filament loss. This can be achieved by pinching the end of the channel with pliers or wire cutters. All seals should be fitted with the door in the closed position, so that the brush filaments are in firm contact with the mating surface. Care should be taken not to overflex the trim against the mating surface.

Right angle brushstrip draught excluders for doors. The ideal draught excluders for doors in all locations. Also helps keep out dust and crawling insects. 90° aluminium fixing channel comes with a hard-wearing nylon brush pre-fitted. Available with range of bristle sizes. 2m sections only. For 2.5m or 3m sections, please contact us.ALL SIZES NOMINAL. PRICES EXCLUDE VAT.

Need help?>>> Get a free personalised quote>>>

90° brushstrip draught excluders are the easy fit solution for all pedestrian, roller or sectional over-head doors where gaps allow for ingress by draughts, dust, debris and insects. As well as keeping out the unwanted, they can also help to keep in precious heat and  / or cold as they create an effective door seal to the floor. Alternatively, if you have a strip curtain that hasn’t been able to make a snug fit to the side edges of a wall or door frame, brushstrip can also be used to effectively bridge these gaps up the sides or along the top.

All sizes & thickness.

At Redwood Strip Curtains, we can supply a huge range of 90° brushstrip draught excluders with bristles of all lengths – from  just a few millimetres right up to 300mm! With a range of thickness. All held securely in a hard-wearing aluminium head. So, whether you need a commercial brushstrip or an industrial brushstrip there’s an option to suit.

Standard sectional widths are 2m, 2.5m or 3m.

Single Band strip brush specification:

Type X Y T H L
mm mm mm mm mm mm Model
2.5×2.5 2.4-2.7 2.5-2.9 5-50 7-60 20-3000 S01011AL
3.0×3.0 2.8-3.2 2.8-3.1 5-60 8-70 20-3000 S01012AL
3.5×3.5 3.3-3.7 3.3-3.6 8-70 12-80 20-3000 S01013AL
3.5×4.0 3.3-3.7 4.0 8-80 12-120 20-3000 S01014AL
4.0×4.0 3.7-4.2 3.8-4.2 8-80 12-120 20-3000 S01015AL
4.0×7.0 3.7-4.2 7.0 8-80 12-150 20-3000 S01016AL
4.5×4.5 4.2-4.5 4.3-5.2 8-130 13-150 20-3000 S01017AL
5.0×5.0 4.7-5.2 4.8-5.0 8-130 13-150 50-3000 S01018AL
6.0×6.0 5.7-6.1 5.8-6.2 8-130 14-150 50-3000 S01019AL
6.0×8.0 5.7-6.1 8.0 8-130 14-150 50-3000 S01020AL
7.0×7.0 6.7-7.1 6.8-7.2 8-130 15-150 50-3000 S01021AL
8.0×8.0 7.5-8.3 7.8-8.2 26-292 34-300 50-3000 S01022AL

Strip Brush Holders

○ Strip brush holders, also called support, is the spare part of a strip brush, often used to fix strip brushes.

○ Usage: Insert a strip brush into the holder channel, screw it at ending; or fix it by glue easily.

F type aluminum holder specification:

Model No. G Colour F W=S A*B X*Y D C Length weight/meter
Unit mm mm mm mm mm(FB*FH) mm mm mm kg
1 15.8F Sliver 1 5*5 4.5*4.5
2 18F Sliver 2 6.5 4.5*4.5 4×4 12.5 2.5 2200 0.118
3 22.5F Sliver 1.1 5.5*5.5 5*5
4 22.5F Sliver 1.8 4.5*4.5 4*4
5 25F Sliver 1 5*5 4.5*4.5
6 25F black 1 5*5 4.5*4.5
7 35F Sliver 1.2 5*5 4.5*4.5
8 40F Sliver 2 12 7.3*7.3 7*7 29.3 5 2000 0.3143
9 50F Sliver 1.2 10 7.2*7.2 7*7 39.5 4.8 2000 0.2

 

Pls feel free to connect with us if you want to buy that type of brush.We will aways standby and do my best to help you.

  

Scroll to Top