Sidebar Menu

Hot Products

Brush Strip 45° Angle

Available in three aluminium sections (180°, 45° and 90°), each in six different sizes. Standard lengths are 2000mm, 2500mm and 3000mm. The aluminium fixing carrier is supplied silver mill finish and the filament is type 6 black nylon. It is hard wearing with a working temperature from -40°C to +100°C. The brush can also be supplied without the aluminium fixing carrier if required (see cam strips on opposite page). The brush length sizes quoted are the mm of brush strip protruding out of the aluminium carrier.All sections can be cut to length using a fine tooth saw. It is important that the galvanised steel channel which houses the nylon brush is then sealed to avoid filament loss. This can be achieved by pinching the end of the channel with pliers or wire cutters. All seals should be fitted with the door in the closed position, so that the brush filaments are in firm contact with the mating surface. Care should be taken not to overflex the trim against the mating surface.

45° superior brush strips for draught and pest control – totally weather resistant and maintenance free.A dual-purpose bristle strip that keeps out vermin, insects and birds, also creating a seal against draughts, dust and noise pollution.

  • Conforms to irregular surfaces for total gap fill whilst allowing free door movement
  • Highly effective draught control – 98% seal against air flow
  • Retains warm or chilled air – reducing heating, air conditioning or refrigeration costs
  • Reduces dust, fumes, noise, improving the working envrionment
  • Supplied in various metre lengths
  • 45-degree angle
  • High quality aluminium fixing
  • Available in a flat & 90° angle

Are you losing your hard-earned profits through the gaps around your premises?
Struggling to keep the temperature up – or down?
Are rodents and insects threatening the hygiene standards of your operation?
Battling with dust or fumes?
Bursten Brush Strip is the instant, cost-effective answer to all these problems, and many, many more…
Helps to prevent insects, small rodents and birds – reducing disease, contamination, damage and the need for harmful pesticidesReduces dust, fumes, noise, improving the working environmentTotally weather resistant, extremely durable and maintenance freeVery quick and easy to fit with little or no disruptionCan pay for itself in fuel savings in just one year
Polycote Brush Strips conform to irregular surfaces for total gap fill whilst allowing free door movement.

Pests often utilise gaps under doors and windows as an easy entry point into buildings. Brush strips are designed to block one of the most exploited ingress points in pest control. 45-degree bristle strips are available in various metre lengths and are provided with an aluminium fixing carrier for added protection.

Our 45-degree strips are supplied in a range of different sizes such as 20mm, 25mm, 35mm, 50mm, 75mm, 100mm and 150mm. Once an infestation has been removed, proofing using brush door strips is crucial to prevent reinfestation.

Available in three aluminium sections (180°, 45° and 90°), each in six different sizes. Standard lengths are 2000mm, 2500mm and 3000mm. The aluminium fixing carrier is supplied silver mill finish and the filament is type 6 black nylon. It is hard wearing with a working temperature from -40°C to +100°C. The brush can also be supplied without the aluminium fixing carrier if required (see cam strips on opposite page). The brush length sizes quoted are the mm of brush strip protruding out of the aluminium carrier.All sections can be cut to length using a fine tooth saw. It is important that the galvanised steel channel which houses the nylon brush is then sealed to avoid filament loss. This can be achieved by pinching the end of the channel with pliers or wire cutters. All seals should be fitted with the door in the closed position, so that the brush filaments are in firm contact with the mating surface. Care should be taken not to overflex the trim against the mating surface.

At Bursten, we supply a range of brush strips in different angles to ensure you’re able to deal with any situation.

 

Single Band strip brush specification:

Type X Y T H L
mm mm mm mm mm mm Model
2.5×2.5 2.4-2.7 2.5-2.9 5-50 7-60 20-3000 S01011AL
3.0×3.0 2.8-3.2 2.8-3.1 5-60 8-70 20-3000 S01012AL
3.5×3.5 3.3-3.7 3.3-3.6 8-70 12-80 20-3000 S01013AL
3.5×4.0 3.3-3.7 4.0 8-80 12-120 20-3000 S01014AL
4.0×4.0 3.7-4.2 3.8-4.2 8-80 12-120 20-3000 S01015AL
4.0×7.0 3.7-4.2 7.0 8-80 12-150 20-3000 S01016AL
4.5×4.5 4.2-4.5 4.3-5.2 8-130 13-150 20-3000 S01017AL
5.0×5.0 4.7-5.2 4.8-5.0 8-130 13-150 50-3000 S01018AL
6.0×6.0 5.7-6.1 5.8-6.2 8-130 14-150 50-3000 S01019AL
6.0×8.0 5.7-6.1 8.0 8-130 14-150 50-3000 S01020AL
7.0×7.0 6.7-7.1 6.8-7.2 8-130 15-150 50-3000 S01021AL
8.0×8.0 7.5-8.3 7.8-8.2 26-292 34-300 50-3000 S01022AL

 

Pls feel free to connect with us if you want to buy that type of brush.We will aways standby and do my best to help you.

 

Scroll to Top