Application of Abrasive End Brushes used in cleaning and finishing CNC and robotic parts
1.frequently used to fit into tight areas too small for wheels and discs,
2.they are for operations where balance is critical, as in CNC and robotic use
3.to remove plastic bridle keeps silicon carbide impregnated filaments from flaring
4.used in cleaning and finishing, de-burring, edge blending, polishing spot facing, brushing recessed areas, etc.
Characteristic of Abrasive End Brushes used in cleaning and finishing CNC and robotic parts
1. Compared with wire end brush, abrasive nylon end brushes has the complete length of the filament acts as cutting edge but wire end brush cut on the tips.
2. Abrasive nylon has greater flexibility enabling deeper brush Penetration.
The advantage of end brush
1. flexible in application
2.with low cost
Abrasive End Brushes used in cleaning and finishing CNC and robotic parts can be used in surface treatment such as deburring, rust-removal, polishing, etc. Especially for the hard-to-reach areas.We offer deburring brushes for CNC to buyers around the world. Customer satisfaction is our greatest pursuit. Write an email to us and ask about abrasive deburring end brushes for CNC.
| D3 | D2 | L | T | D1 | Silicon Carbide | Aluminum Oxide |
| mm | mm | mm | mm | mm | (Grit #80-#600) | |
| 11 | 10 | 38 | 25 | 6 | B0101SIC | B0101AIO |
| 13 | 12 | 41 | 25 | 6 | B0102SIC | B0102AIO |
| 15 | 14 | 43 | 25 | 6 | B0103SIC | B0103AIO |
| 17.5 | 16.5 | 45 | 25 | 6 | B0104SIC | B0104AIO |
| 19 | 18 | 46 | 25 | 6 | B0105SIC | B0105AIO |
| 26 | 25 | 47 | 25 | 6 | B0106SIC | B0106AIO |
| 29 | 28 | 47 | 25 | 6 | B0107SIC | B0107AIO |
They are ideal for cleaning and finishing inside diameters, spot facing and recessed areas, so recommended for operations where balance is critical, as, in CNC and robotic use, they can also be used on portable air and electric tools. Normally use 6mm shank diameter, fill material can be silicon carbide, aluminum oxide. Abrasive nylon filament grit from #80 to #600 depends on customer requirements or different applications.
Please contact us about your requirement, we can make a new customized end brush for your unique application.
|  |
Abrasive End Brushes Used In Cleaning And Finishing Cnc And Robotic Parts | Abrasive End Brushes Used In Cleaning And Finishing Cnc And Robotic Parts |
