Call us at +8613781822862
_
_
_
_

Diamond Abrasive Nylon Filament Brushes For Deburring And Polishing

Diamond Abrasive Nylon Filament Brushes for deburring and polishing work best at speeds allowing fairly deep penetration of the work piece into the brush filaments. Faster speeds do not typically work as well as slower speeds.

Download instructions

disc_brush.pdf

Products Details

Diamond Abrasive Nylon Filament Brushes for deburring and polishing are made with plastic base and abrasive filament. Diamond abrasive nylon filament diameter available standard are 0.3mm, 0.45mm, 0.6mma and 0.8mm in and #240, #600, #800 and #2000.
Diamond Abrasive Nylon Filament Brushes for deburring and polishing work best at speeds allowing fairly deep penetration of the workpiece into the brush filaments. Faster speeds do not typically work as well as slower speeds.
ROTATIONAL DIRECTION
On the initial pass of the Diamond Abrasive Nylon Filament Brushes for deburring and polishing, the rotation should be in the opposite direction of the cutting tool that created the burr. Diamond Abrasive Nylon Filament Brushes for deburring and polishing should overlap the edge of a working piece by 1" minimum.

The ideal brush path is in the opposite direction of travel from the cutting tool that created the burr. The brush path should also be longer than the cutting tool path, to a point where the trailing edge of the brush is effective at the end of the part. Lastly, to maximize the amount of filament that is striking the part, the centerline of the brush should be offset from the center of the part.

The abrasive action occurs when the sides of the brush filament slide across the part surface or edge of the part. When the correct balance between speed (RPM), penetration, dwell time and abrasive grit size are achieved, then optimum life and cut can be obtained.
The characteristic of diamond abrasive nylon bristle
Diamond is a hard ceramic with low thermal expansion. This fine grain abrasive filament is well-suited for fine finishing and cleaning.

 

SPECIFICATION CUSTOMIZED
Product name Diamond Abrasive Filament Brush
Application Often assembled in grinding wheel machine, angle grinder, air tools, etc.
Materials Diamond Abrasive Materials
Grit #240 #800 #600 #2000
Shape Circular
Body Material Plastic
Application Industrial polishing, cleaning
Package Bubble film, hard carton, corrugated carton, plywood box, wrapping film
Custom instructions Contact us to send detail dimension or drawing

 

 

 

Diamond Abrasive Nylon Filament Brushes For Deburring And Polishing
Diamond Abrasive Nylon Filament Brushes For Deburring And Polishing

 

 

LEAVE A MESSAGE